How to Root Android 6.0 Marshmallow in Lenovo K3 Note

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative permissions as on Linux or any other Unix-like operating system.

Lenovo Marshmallow 6.0 update for the K3 Note users. It was rumored that K3 Note will be updated in September but thanks to the developers at Lenovo for sending us this update this soon. Well, with such a big user base they had to. Lenovo is surely ahead of Samsung in terms of updating the firmware. Samsung released the Root  Marshmallow 6.0 in Lenovo k3 note update on Galaxy S6 and S5 this May.

Lets Do How to Root Android 6.0 Marshmallow in Lenovo K3 Note

 

This Article is helps you to How To Root Android Marshmallow in Lenovo K3 Note.Before updating my K3 Note Root Android 6.0 Marshmallow in Lenovo K3 Note to Marshmallow I had a rooted Android 5.0 version. So first I had to unroot it and then download and install the update. But, it wasn’t that easy. I also had CWM Custom Recovery installed. And, the official firmware update only gets installed using the Stock recovery. So, I had to unroot my phone and flash the stock recovery to make it ready for the update.  So, if you’re getting installation errors while updating to Marshmallow then it’s probably because you don’t have the stock recovery.So I had to unroot my phone and flash the stock recovery to make it ready for Root Android 6.0 Marshmallow in Lenovo K3 Note the update. If you’re getting installation errors while updating to Marshmallow then it’s probably because you don’t have the stock recovery.

Steps For How to Root Android 6.0 Marshmallow in Lenovo K3 Note

 

Step -1 : Flash Custom Recovery (TWRP)

1.First, we’ll have to flash a custom recovery. Here, I’ve used TWRP. I’m using it ever since I started Root Android 6.0 Marshmallow in Lenovo K3 Note. I recommend you use it for this Root  Android 6.0 Marshmallow in Lenovo K3 Note guide too. We’ll need here TWRP version 2.8.7.0 and above. Also, we are going to flash the custom recovery using ADB in Fastboot mode.

2.Download TWRP from the official website. And, download this zip file and extract it. It contains ADB files to Flash the recovery.

3.Now, connect your phone to PC and make sure USB debugging is ON.In the ADB folder,  I’ve already placed the TWRP 2.8.7.0 image file. If you’ve downloaded a higher version then you can replace it. Now, in the ADB folder double click on py_cmd.exe. Here, you will enter all the ADB commands.

4.Now, paste the following command to check if ADB detects your connected device.

                                 

                                          Command: adb devices

5.Next, enter this command to reboot your phone into Fastboot mode
                         
                                    Command: adb reboot bootloader

6.Enter this command to make sure the device boots into Fastboot mode.

                                   Command: fastboot devices

7.Now, we’ll flash the recovery image. Use the following command to do so.

                                   Command: fastboot flash recovery twrp-recovery.img

8.Make sure the image file name is same as in the folder. Now, we have to reboot the phone. But, right after you enter the command for reboot you need to press Volume Up + Volume Down + Power Button in order to directly go into TWRP recovery. So, make sure you press the button combination right after you enter the command for Reboot. Here’s the reboot command.

                                    Command: fastboot reboot

Here’s the complete log of the ADB commands.

Now, that you are in the TWRP recovery take a Nandroid backup of the Stock Firmware. After you’ve backed up the Firmware, let’s root it.

Step -2 : Lets Root

1.Download the patched boot.img and SuperSu-2.46.zip file provide by emptywordsss and place it in your phone storage.

2.Now, boot into custom recovery. Shut down your phone and press the button combination(Volume 

Up + Volume Down + Power Button) to boot into recovery.

3.First, we need to install the patched boot image. Tap on Install and on the next screen select Install Image from the top menu.

4.Next, navigate to the boot.img file and install it. Swipe to install it.

5.Don’t reboot after install. Next, install the SuperSu zip file. Perform the same steps but this time, choose Install Zip from the top menu.

6.Navigate to the zip file and install it. Swipe to install it. The necessary checkboxes that are to be checked are shown below.

7.It should successfully flash the zip. Now hit on Reboot System.

8.Install a root checker app and see if it’s rooted. If you have the SuperSu app installed then it’s definitely rooted.

Your Lenovo k3 Note powering Android 6.0 Marshmallow should now be rooted. Now, you got a big arena to explore. Let us know if there were any problems in rooting your phone. We’d love to solve them.
By This Article  I Hope You to Know How To Root Android 6.0 Marshmallow In Lenono K3 Note

                                  Thank You Frinds Hope You To Visit Again

Hack WiFi Network and Crack WiFi Password from Android Mobile

Hack WiFi Network and Crack WiFi Password from Android Mobile .

 

Most of the people are very much interested in hack Wi-Fi networks, but it may not be for illegal activities. Strong Encryption techniques have been developed in order to secure Wi-Fi networks. There are different types of Encryption from which three basic security encryption are most common.
Before cracking a Wi- Fi network, you must be aware of basic encryption techniques that protect a Wi-Fi network. These three methods of encryption are the major sources of vulnerability associated with wireless networks. The different types of Wireless Encryption Security techniques There are WEP,WPA,WPA2.

Possible Ways to Hack WiFi Network and Crack WiFi Password from Android Mobile.

 

Hai Readers Now I write this post for my readers who daily read my blog and want clear your doubts about wi-fi hacking from android mobile. In this post, we briefly describe you how you hack wi-fi network and crack the password of any wi-fi from android mobile.

What Requirements need for Hacking WiFi from Android Mobile .

 

    1.Your Android Phone with good Processor and RAM.
    2.Your Android Phone Must be Rooted .
    3. Good WiFi network signal.

1. Hack WiFi Network and Crack WiFi Password Using WPS Connect.

 

 You can hack WiFi network with this app, which hasWPS enabled in security.If you found any wi-fi network in your Android mobile, which shows WPS security. You can easily connect with any WPS  security wifi without given any type password. WPS Connect bypasses WPS security and gives you access to connect with wi-fi without typing any password

1.With this app, you’ll connect to WiFi networks which have WPS protocol enabled. This feature was only available in version 4.1.2 of Android

2.WPS Connect is focused on verifying if your router is vulnerable to a default PIN. Many routers that companies install own vulnerabilities in this aspect. With this application, you can check if your router is vulnerable or not and act accordingly. 

2.Hack WiFi Network and Crack WiFi Password With Wps Wpa Tester.

 

WPS Connect app hack only WPS routers with limited features. But this is an advanced app for hacking wifi password from android mobile. Make sure your phone is rooted. You can check the wireless security of your routers from this Android app. If your router is not secure this wifi hacking android app easily bypass wifi password from android mobile and connect with android mobile to router directly without need any type of password.
The algorithm of wps default SOME of the routers, you can receive the WPA WPA2 WEP set to the router.

This wifi hacking Android apps works in rooted and without rooted android mobile. So you can easily hack wifi password from your android phone without rooting your android phone with this app.

Thank you Readers  If you have any doubt, comment below. Sure we will try to help you

How to Play Pokemon go game in Banned Countries

How to Play Pokemon go game in Banned Countries

 

Hai Readers I Would Like To Explain How To Play Pokemon Go In Banned Countries .This Article May Helps You in To Play Pokemon Go In Banned Countries .This Game Requires Gps Connection.

 

Pokémon Go is a free-to-Play Pokemon go game location-based augmented reality game developed by Niantic for iOS, Android, and Apple Watch devices.In the game, players use a mobile device's GPS capability to locate, capture, battle, and train virtual creatures, called Pokémon, who appear on the screen as if they were in the same real-world location as the player. The game supports in-app purchases for additional in-game items.Today the Pokemon go game is available only in 38 regions of North America (USA and Canada), Europe (France, Germany and 29 more countries) and Asia-Pacific (Hong Kong, Japan, Australia and New Zealand).With VPN you can play Pokemon Go Game without any restrictions because VPn changes your IP address so it looks like you are playing from a region where the game works.

How to play pokemon go game in banned countries.

To Play Pokemon Go game in banned countries you need 3 simple steps

1.Get VPN account
2.Setup VPN connection
3.Play Pokemon Go game

How to Play Pokemon in Banned Countries With The Help Of Vpn.

To play Pokemon GO in Banned Countries you need to make a vpn connection.

1.Click Settings icon.

 2. Select Wireless & Networks and tap on VPN.

3. Tap Add VPN Network.

4.Input connection name (Sahrzad VPN), select the type of your VPN connection – PPTP VPN, input VPN server address from your account data.

5.Input your Username and password that you received from VPN account service in e-mail And Save it and tap Connect.

 For connection to vpn server you have to follow these steps

Select Home > Menu > Settings

   1. Tap Wireless & networks
   2. Tap VPN settings
   3. The VPN connections you have added are present in the list
   4.Tap the VPN you wish to connect to (Sahrzad VPN)
   5. A dialog box will open asking for your credentials, enter them and click connect.

When you are connected to VPN, you will see an ongoing notification in the Status bar on your Android device. If you are disconnected, you will receive a notification and an option to go back to the VPN settings section.

Once you have created vpn connection you can switch it on and off on the main settings screen.

With VPN you can enjoy Pokemon GO game.

How to play Pokemon Go Game in Banned Countries with VPN  in Ios

   

To Play Pokemon GO in iOS device follow the next steps:

  Go to Settings > General > VPN

2.Click Add VPN Configuration.

  3. Choose PPTP VPN and enter you VPN account data. You will receive your VPN server, username and password in the e-mail.

4. Save your VPN configuration. Once you have created VPN connection you can switch it ON and OFF on the main settings screen

Once you have created vpn connection you can switch it on and off on the main settings screen.

 Enjoy Pokemons today with VPN.

            Thank You Readers Hope You Visit Again